Join two antennas to eliminate the need of a rotator. Takes 75 Ohm
downleads from two different antennas and combines the signals. This
unit is power passive on side.
With proper spacing, joining two
antennas can be a great alternative to a rotator. It is recommended
that you run equal lengths of coax cable from each antenna to the
CC-7870 to eliminate multipath and out of phase signals. Always join
identical antennas for the best results.
transformer-type antenna coupler as the CC-7870 provides isolation
between antennas limiting the combining loss and possible antenna
loading to no greater than -3.5 dB to the output signal level.
two 75 ohm leads from any two antennas to a 75 ohm coaxial downlead.
passive to Set 1 side.
- 3.5 dB insertion loss.
- VHF/ UHF /